NCERT Computer: Chapter 5 – Data Communication and Networking Part 2

Data Transmission Modes

Transmission mode means transferring of data between two devices. It is also called communication mode. These modes direct the direction of flow of information.

There are three types of transmission mode.

This diagram shows three transmission mode

Diagram of Three Transmission Mode

This diagram shows three transmission mode

There are three ways for transmitting data:

1. Simplex: In simplex mode the communication can take place in one direction. The receiver receives the signal from the transmitting device. In this mode the flow of information is Uni-directional. Hence it is rarely used for data communication.

2. Half-duplex: In half-duplex mode the communication channel is used in both directions, but only in one direction at a time. Thus a half-duplex line can alternately send and receive data.

3. Full-duplex: In full duplex the communication channel is used in both directions at the same time. Use of full-duplex line improves the efficiency as the line turnaround time required in half-duplex arrangement is eliminated. Example of this mode of transmission is the telephone line.

This image shows transmission mode

Image of Transmission Mode

This image shows transmission mode

Fig. Simplex, Half-Duplex and Full-Duplex.

1 Digital and Analog Transmission

Data is transmitted from one point to another point by means of electrical signals that may be in digital and analog form. In analog signal the transmission power varies over a continuous range with respect to sound, light and radio waves. On the other hand, a digital signal may assume only discrete set of values within a given range.

Analog signal is measured in Volts and its frequency is in Hertz (Hz). A digital signal is a sequence of voltage represented in binary form. When digital data are to be sent over an analog form the digital signal must be converted to analog form.

This image shows Analog singnal and Digital signal

Image of Analog Singnal and Digital Signal

This image shows Analog singnal and Digital signal

2 Asynchronous and Synchronous Transmission

Asynchronous and synchronous communication refers to methods by which signals are transferred in computing technology. These signals allow computers to transfer data between components within the computer or between the computer and an external network.

Data transmission through a medium can be either asynchronous or synchronous. In asynchronous transmission data is transmitted character by character as you go on typing on a keyboard.

The saved data is transmitted block by block. Each block can contain many characters. Synchronous transmission is well suited for remote communication between a computer and related devices like card reader and printers.

This image shows asynchronous transmission and synchronous transmission

Image of Asynchronous Transmission and Synchronous Transmission

This image shows asynchronous transmission and synchronous transmission

Explore NIOS Notes

Sign In